D6 MAX
Zirconium/Pmma/Wax/Peek/Soft metals/CrCO/Ceramic and Titanium are optional with wet system..
Options
- Software
Basic CAM software for Crown&Bridges. You can mill all kinds of material. The basic software is limited to mill jobs without any holes in the designed file. For example crowns and bridges. |
€4,320.00 | |
Abutment Milling add-on. With this add-on, you can mill abutments and ti-bases, etc. If you have one hole in the designed file, you can mill it safely with this add-on.
|
€5,760.00 | |
Screw retains and bars module. You can mill all kinds of implant applications with this add-on. It covers 5 axes and Single modules. |
€8,640.00 | |
Starter cutting tools pack. Check the details in the description. |
€264.00 |
- Hardware
The water system consists of a filter, pump and tank. It is necessary to mill titanium and ceramics. Ceramic holder with the system is standard. |
€2,400.00 | |
Holder for Yenamill milling. It has 6 holes for 9 mm connection Yenamill's. |
€960.00 |
- Scanner
Accuracy: 9 μm (IS0 12836) Full arch scan speed: 18 sec (7 cuts) Auto-elevation: Included Color texture: Included Flexible scanning: Optional Articulator scanning: Optional Replica denture: Optional Orthodontic scanning: Optional Impression scanning: Excluded |
€9,000.00 | |
Accuracy: 7 μm (IS0 12836) Full arch scan speed: 12 sec (7 cuts) Auto-elevation: Included Color texture: Included Flexible scanning: Included Articulator scanning: Included Replica denture: Optional Orthodontic scanning: Optional Impression scanning: Excluded |
€12,000.00 | |
Accuracy: 4 μm (IS0 12836) Full arch scan speed: 18 sec (7 cuts) Auto-elevation: Included Color texture: Included Flexible scanning: Included Articulator scanning: Included Replica denture: Included Orthodontic scanning: Included Impression scanning: Included |
€16,800.00 |
- Furnace
Zirconium sintering furnace. It comes with one tray. MoSi2 heating components. It saves its work when the power is cut off. The process continues when the power is restored from where it left off. You can leave the program running at night and the furnace will switch to a power-saving mode when the program is finished. You can provide 4-5 loops during the day. It has a chamber diameter of 100 mm, which can easily take 90 mm trays. You can put 3 trays for one person. You can operate the furnace in 3 languages. Other languages can be added upon special request. Its interface is ergonomic and you can program it to step by step. |
€7,200.00 |
- Materials
- Zirconia / PMMA / Wax / Peek / Soft Metals / CrCo
- Axis Numbers
- 5
- Disc Holder
- 6
- Spindle Power
- 2.7 kW
- Spindle RPM
- 60.000 RPM
- A&B Tilt Angles
- 30x360 degrees
- Tool Changer Pockets
- 30
- Weight
- 320 kg
- Crown&Bridge
- With 5 Axis Software
- Custom Abutments
- With Single Add-on
- Premill
- With Single Add-on
- Screw Retains & Bars
- With Multi Add-on
