D15 MAX
Zirconium/Wax/Pmma/Soft metals/Peek/Ceramic (optional with wet system)
Your ideal starter machine.
You can increase the capability of your machine by starting with soft materials and adding metal milling later.
Once you've added supporting products to your D15, you can engrave anything from metal screw retain bridges and bars to premills.
Options
- Software
Basic CAM module to mill crowns and bridges. You can mill all soft materials and ceramics. |
€2,160.00 | |
Implant module. You can mill all kinds of implant designs on soft materials. It covers 5 axis module. |
€4,320.00 | |
Starter cutting tools pack. Check the details in the description. |
€204.00 |
- Hardware
It is mainly used to collect dust in the environment when processing zirconia. It is automatically opened and closed by the machine. It has gradual traction adjustment and an interchangeable filter. |
€1,500.00 | |
The water system consists of a filter, pump and tank. It is necessary to mill titanium and ceramics. Ceramic holder with the system is standard. |
€2,400.00 | |
TABLE for D15 Machine. The rigid steel construction table is covered with wooden furniture. It has a drawer. |
€2,400.00 |
- Scanner
Accuracy: 9 μm (IS0 12836) Full arch scan speed: 18 sec (7 cuts) Auto-elevation: Included Color texture: Included Flexible scanning: Optional Articulator scanning: Optional Replica denture: Optional Orthodontic scanning: Optional Impression scanning: Excluded |
€9,000.00 | |
Accuracy: 7 μm (IS0 12836) Full arch scan speed: 12 sec (7 cuts) Auto-elevation: Included Color texture: Included Flexible scanning: Included Articulator scanning: Included Replica denture: Optional Orthodontic scanning: Optional Impression scanning: Excluded |
€12,000.00 | |
Accuracy: 4 μm (IS0 12836) Full arch scan speed: 18 sec (7 cuts) Auto-elevation: Included Color texture: Included Flexible scanning: Included Articulator scanning: Included Replica denture: Included Orthodontic scanning: Included Impression scanning: Included |
€16,800.00 |
- Furnace
Zirconium sintering furnace. It comes with one tray. MoSi2 heating components. It saves its work when the power is cut off. The process continues when the power is restored from where it left off. You can leave the program running at night and the furnace will switch to a power-saving mode when the program is finished. You can provide 4-5 loops during the day. It has a chamber diameter of 100 mm, which can easily take 90 mm trays. You can put 3 trays for one person. You can operate the furnace in 3 languages. Other languages can be added upon special request. Its interface is ergonomic and you can program it to step by step. |
€7,200.00 |
- Materials
- Zirconia / PMMA / Wax / Peek / Soft Metals / CrCo
- Axis Numbers
- 5
- Disc Holder
- 1
- Spindle Power
- 1.3 kW
- Spindle RPM
- 60.000 RPM
- A&B Tilt Angles
- 25x360 Degrees
- Tool Changer Pockets
- 28
- Weight
- 130 kg
- Crown&Bridge
- With Basic Module
- Custom Abutments
- With Single Add-on
- Premill
- Optional
- Screw Retains & Bars
- With Advance Module
