Home
YenadentCAM 6 - 5 Axis
Basic CAM software for Crown&Bridges. You can mill all kinds of material. The basic software is limited to mill jobs without any holes in the designed file. For example crowns and bridges.
D15 MAX
Zirconium/Wax/Pmma/Soft metals/Peek/Ceramic (optional with wet system)
Your ideal starter machine.
You can increase the capability of your machine by starting with soft materials and adding metal milling later.
Once you've added supporting products to your D15, you can engrave anything from metal screw retain bridges and bars to premills.
YenadentCAM 6 - Multi
Screw retains and bars module. You can mill all kinds of implant applications with this add-on. It covers 5 axes and Single modules.
YenadentCAM 6 - Single
Abutment Milling add-on. With this add-on, you can mill abutments and ti-bases, etc. If you have one hole in the designed file, you can mill it safely with this add-on.
YenadentCAM 6 - SOFT 5 Axis
Basic CAM module to mill crowns and bridges. You can mill all soft materials and ceramics.
Spindle 1.3 kW to 2.7 kW
For D15 , D15W, and D15B only. Upgrade from 1.3 kW spindle to 2.7 kW 60.000 RPM spindle. The water cooling system comes with this upgrade.
YenadentCAM 6 - SOFT Multi
Implant module. You can mill all kinds of implant designs on soft materials. It covers 5 axis module.
Wet System
The water system consists of a filter, pump and tank. It is necessary to mill titanium and ceramics. Ceramic holder with the system is standard.
Furnace
Zirconium sintering furnace.
It comes with one tray.
MoSi2 heating components.
It saves its work when the power is cut off. The process continues when the power is restored from where it left off. You can leave the program running at night and the furnace will switch to a power-saving mode when the program is finished. You can provide 4-5 loops during...
